Murata Power Solutions today announced the ULT series of isolated 30 Watt DC/DC converters available in a miniature 1/32 brick industry standard Distributed-power Open Standards Alliance (DOSA) compatible open frame package. Measuring just 19.1 x 23.4 x 8.89 mm, the ULT series takes up significantly less board space than other 30W products on the market and is available with either through-hole or surface mount option. The ULT series has been designed with a wide (2:1) input voltage range of 36 -- 75 VDC to meet the requirements of 48V and 60V battery back-up systems. The initial product release includes 12Vout, 5Vout, and 3.3Vout models with lower voltages to come in the near future. The maximum output power of 30 W is available from the 12Vout model, with the 5V and 3.3V models producing 25W. Line regulation is typically within +/- 0.1% of Vout across all Vin conditions at full load. An external trim function allows the output voltage to be trimmed by + 10 % to -- 20% to accommodate losses. Input to output isolation is certified to 1500 V in accordance with the internationally recognized safety standard EN/UL60950. The ULT series offers features that include remote On/Off control of either negative or positive logic, Vout trim and a remote sense capability. In addition the converter has a number of protection features including output short circuit protection, over temperature shutdown and input under voltage lockout. The ULT series was designed for a wide range of ...
Tags: DC/DC Conveter, isolated dc-dc converter, 30W dc-dc converter, 1/32 Brick DC/DC Converter
No comments:
Post a Comment